Next Generation Autodeposition Coating

Aquence™ 930™ Coating

For ferrous applications, Aquence 930 coating meets all industry standards and requirements, and meets or exceeds the specs for traditional coating methods, as illustrated in the table below. Aquence 930 increases corrosion protection of the Autophoretic process to “best in class” level, while improving the manufacturing process. Result? Manufacturers will see an increase in product line profitability.

Film Properties:

Test	Aquence™ 930™
FILM THICKNESS (MILS)	0.5 - 1.0(12.7-25.4 µ)
CROSS HATCH ADHESION	NO FAILURE
GLOSS @ 60°C	30 - 50
PENCIL HARDNESS	H - 3H
COLOR	Black
REVERSE IMPACT	60 - 120 IN-LBS.
SOLVENT RESISTANCE (MEK)	>100 MEK-DR

Anticorrosion Properties:

Test	Aquence™930™
	Average Total Scribe Creep
1008 HRS NSS, ASTM B-117	3 MM Total creep
40 CYCLES GM 9540 P	3 MM Total creep
40 CYCLES SAE J2334	3 MM Total creep
1008 HRS NSS, ASTM B-117 AFTER HEAT SOAK (48 HRS IN 204°C)	6 MM Total creep
240 HRS HUMIDITY, D 1735	0.8 mm creep from X scribe
WATER SOAK FLTM BI 104-01	No adhesion loss, 120 hrs

The information contained herein is based on information believed by Henkel to be accurate at the date of testing. No guarantee of performance is given. Additional or updated information may be obtained by contacting Henkel Corporation.

Improved Coating for High Corrosion Environments

Increases corrosion protection of Autophoretic process to “best in class” level
Improved manufacturing process increases product line profitability

Aquence is Henkel’s patented Autophoretic Coating Chemical autodeposition process and technologies.

Click here to view a FLASH demonstration of the autodeposition process.